Testing Machine

Approx. Rs 2,50,000 / PieceGet Latest Price

Product Details:

The set provides three current generators and four voltage generators. With these sources, complete test system for  testing of virtually all types of single or  three phase  protection equipment viz. Electromechanical, Static and Numerical relays. Various primary switchgear testing can also be performed. Since all the voltage and current sources have floating ungrounded neutral which allows all the sources to be used either separately, in parallel or in series. This feature becomes useful when higher currents, voltages or VA ratings are required.  Other fields of operation are Plotting of CT excitation curves, Ratio Tests of CT\'s and PT\'s and Primary Injection in single or three phase switchgear. 6 sets of variable current sources for testing O/C, E/F, S/C and Differential Relays are available. A variable 3-phase Voltage source is available for testing Directional and Power Relays. In conjunction with a Phase Shifter, all types of relays except the Frequency relays can be tested.Specifications:Input: 415 V, 3-phase, 50 Hz, + 10%  or 240 V, 1-phase (for 1 phase operations).Outputs: A. Currents  : 0-2/10/50 Amps, 3-nos./phases, 300 VA per phase,  continuously variable, isolated. Can be star-connected0-10 Amps, 3-nos./phases, 100 VA per phase, continuously variable,   isolated. Can be star-connected. OrVoltage : 0-300/500 V, 3 nos./phases, 100 VA per phase,  continuously variable, isolated.Can be star connected.  Aux Voltage: 24 V or 110 V DC + 10%  (RTS-3P50) OR0-300 V AC/DC for additional Voltage source (RTS-3P50X)                                                  Metering:1 no. digital Three-phase Ammeter (3.5 dig, acc.-+1%).1 no. digital Voltmeter, 1-phase with switch (4 dig, acc.-+1%). 1 no. digital timer (4 dig, 0.05%), range 0.0001 to 9999 seconds., auto ranging, The RTS-3P50X incorporates 7 nos., 1-phase variacs & 6 nos. loading transformers for variable outputs, currents (6) & voltages (4), with necessary switches, terminals, meters & relays etc. for testing of relays.  Current & Voltage of each phase is independently variable with their values indicated by the meters. There is also the provision of “Make & Break Contact” synchronized with switching ON/OFF of the CURRENT output for testing of UNDER/OVER VOLTAGE relays. It is housed in a moulded VIP-ALFA 23” suitcase with wheels or an MS cabinet with wheels, as desired, for easy transportation. Dimensions: 650 x 450 x 250 mms approx.Weight : 35 Kgs Approx.Note: Equipment may be supplied with specification differing from that described above due to continuous development in the electrical and mechanical design

Approx. Rs 2,00,000 / PieceGet Latest Price

Product Details:

The PLTS-3P incorporates 3 nos. of 1-phase variacs with loading transformers for variable current outputs, 3-phase fixed voltage outputs, phase shifting network, necessary switches, terminals etc. for testing of 1 phase or 3 phase meters. It is housed in a powder coated portable cabinet or VIP-ALFA 20” Suitcase for easy portability.

Specifications:

• Input: 400 V + 10%, 3-phase, 50 Hz.
• Outputs: 1. Voltages : 110, 121, 400 & 440 V (+ 10%), 3-phase, 30 VA per phase,
• star connected, isolated from input, selectable by switch.
• Currents: 0-1 or 0-5 A, 3-phase, (100 VA per phase),  continuously variable, isolated from Input.

Other Features:

•  Phase shifting network for power factors of 0.5, 0.8, lag/lead and Unity, selectable by switches
• Metering: Schneider make, Multifunction meter, model–EM6400, Accuracy-+ 0.2%.
• Housing/Dimensions: Housed in MS Box Cabinet 20”(L)x12”(W)x10”(H) Approx Or
• Weight: 30 kgs. Approx. (MS Box) / 25 kgs. (VIP suitcase) 

Note:

• Equipment may be supplied with specification differing from that described above due to continuous development in the electrical and mechanical design

Approx. Rs 75,000 / PieceGet Latest Price

Product Details:

Technical Specifications: Input : 240 V, 1-phase, 50/60 HzTesting features: Suitable for testing 4-pole as well as 2 –Pole RCCB’s. Trip Current Test Ranges: 0-30 / 100 / 300 mA AC, variableMetering: 4.5 digit DPM, Range 0-1.9999 A, Acc.1.0%Trip Test Button Voltages: 180/200/220/240 V or 100/240/265 V (Suggested) Metering: 3.5 digit DPM, Range 0-500 A, Acc.1.0%Trip Time Test : 0.0001 to 9999 SecsMetering: 4 digit Time Interval Meter, auto ranging, Programmable, Acc. 0.05%Cabinet: Housed in Aluminium BoxDimensions: 315 mm x 280 mm x 220 mm approxWeight: 10 kgs. ApproxNote: Equipment may be supplied with specification differing from that described above due to continuous development in the electrical and mechanical design

Approx. Rs 2,50,000 / PieceGet Latest Price

Product Details:

Sakova A.C. High Voltage Breakdown Testers basically consist of a Double Wound High Voltage Transformer with the H.T. end brought out and terminated on a spring loaded prod for ratings up to 5 KV, or the H.T. end is brought out on a bushing for higher ratings. The lower end of the H.T. winding is at near earth potential and is also brought out, through intermediate circuitry and is terminated on the EARTH connection. The intermediate circuitry included at the lower end of thee H.T. winding enables tripping of supply to the H.T. Transformer, if the current through the test piece exceeds a pre-set value. The low voltage winding of the main HV Transformers is rated for 230 Volts or as specified and is energized by means of a VARIAC through a fuse link and an intermediate contactor/relay. The provision of VARIAC enables gradual application of high voltage to the specimen under test. The “Zero start” interlock switch is provided. Indicating Lamps are provided on the panel of the instruments to indicate “MAINS ON” and “H.T. ON”. A Voltmeter is provided on the panel to indicate the output high voltage. The voltmeter is connected on the low voltage side of the main transformer but is calibrated to read the H.T. Voltage directly. The calibration is carried out at no load. If the failure of the test piece occurs, the supply to the Voltmeter is maintained, although the supply to the HV Transformer is instantaneously cut-off. The voltmeter, therefore, indicates the voltage at which the test piece has failed. The testers of ratings up to 10 KV are housed in a sheet metal housing while those of ratings above 10 KV comprise of two units, viz., a Control unit and an HV transformer unit, made of sheet metal. The Testers are available for output voltages up to 100 KV and different current ratings, as desired.

Note:

• Equipment may be supplied with specification differing from that described above due to continuous development in the electrical and mechanical design.

Approx. Rs 2,00,000 / PieceGet Latest Price

Product Details:

A wide range of precision custom built test measuring equipment instruments and apparatus for various types of electrical product testing applications covering Safety Compliance Testing Quality Assurance Physical Tests Material Tests Electro Technical Testing, Electro-Mechanical Testing etc Equipment to conduct tests as per Iec Ul Iso En Din and similar International Standards T M equipment to test products such as Electrical Appliances Electrical Accessories Switches Sockets Plugs Connectors Electro Mechanical devices Industrial Equipments and many other categories

Approx. Rs 50,000 / PieceGet Latest Price

Product Details:

Specifications:Input: 230 V, 50 Hz., 1-phase.Output Voltage Range: 0-125/250 VOutput Frequency Range: 40-60 HzCapacity: 20 VAHoused in a powder coated sheet-metal cabinet.Dimensions: 345 x 210 x 220 mms. Approx.Weight: 10 kgs. ApproxNote:Equipment may be supplied with specification differing from that described above due to continuous development in the electrical and mechanical design